Some informations about the project:

• Goal: a firewall with DMZ for my home network
• Case: Aluminium, Barebone System
• Dimensions: 5.0cm x 27.5cm x 17.2cm
• Weight: 2,9 kg
• Mainboard: LEX CV763A-4R10C.
• CPU: VIA C7 'Esther', Clock Speed: 1.00GHz, FSB: 400MHz, passive cooling
• LAN: 4 x Realtek 8139c 10/100 Mbit
• WLAN: TP-Link WN910N, Atheros Chipset, 802.11n/g/b, PCMCIA/Cardbus
• Chipset: VIA CN700 + VIA VT8237R Plus
• Front side bus: 400/533 MHz
• Graphics: Integrated with VIA CN700L(B,D,G,H,I,M,N,Nc)
• IDE: Ultra DMA-133/100/66, 1 x 40 pin 2.54mm, 1 x 44 pin 2.0mm
• Support Compact Flash card type II for ATA interface
• Audio: AC-Link, Audio CODEC, AC 97 2.1
• IO function: 1 x RS232 Supports IrDA 1.0/ASKIR protocol
• PS2: Keyboard und mouse
• USB: 7 x USB 2.0
• PCMCIA: Richo R5C812, PCI v2.3, 2x sockets, Cardbus(Card 32) and 16-bit Card
• SATA: One channel connector, SATA drive transfer rate up to 150MB/s
• Mini PCI: for PCI rev: 2.2 interface, 1 x PCI gold finger
• Power: On board DC +12V convert to +3.3V/+12V/+5V
• RAM: 1024MB DDR II RAM 533/400
• Backpanel: 2x USB ,1x Seriell, 2x PCMCIA Slot, 4x RJ-45, VGA, 2x PS/2
• Fan: none :)
• Power consumption: 10~15 Watt
• CF-Card: 2GB Transcent Industrial, UDMA, ECC, SLC NAND Flash
• LCD modul: Crystalfontz 634XE USB LCD 20x4, Version 2.0
• TFT display: Industrial TVS HI-84R12U 8,4", metal frame, 800x600 SVGA
• Software: IPCop v1.9.x firewall distribution (GNU/Linux "LFS" based)

Some informations about the project:

• Goal: a firewall with DMZ for my home network
• Case: Aluminium, Barebone System
• Dimensions: 5.0cm x 27.5cm x 17.2cm
• Weight: 2,9 kg
• Mainboard: LEX CV860A-3R1G.
• CPU: VIA C3 Nehemiah 1 GHz, passive cooling.
• LAN: 3 x Realtek 8139c 10/100 Mbit
• Chipset: VIA PLE 133
• RAM: 512MB SDRAM, low profile module (Kingston KVR133X64C3L/512)
• Backpanel: 2x USB ,2x serial, 1x parallel, 3x RJ-45, VGA, 2x PS/2
• Storage: 1x CF Socket, 1x DOC, 1x 40 pin DOM, 1x 44 pin DOM or 1x 2.5" HDD
• CF-Card: 2GB Trancend Industrial (TS2GCF45I-D, UDMA Mode)
• Harddrive (cold standby): Samsung MP0804H, 2.5", IDE, 80 GB
• Fans: none :)
• Power consumption: 12~20 Watt
• Software: IPCop firewall distribution (GNU/Linux "LFS" based)

• [ LEX System ]
• [ IPCop related link collection ]
• [ IPCop addon binary collection ]
• [ IPCop gallery ]

Some informations about the project:

• Goal: development environment
• System: IBM NetVista 2800 thin client (8364-EXX)
• Dimensions: 7.1 cm x 34.6 cm x 29.3 cm
• Weight: 5,7 kg
• CPU: Intel Pentium Mobile MMX 266 MHz
• L2 Cache: Pipeline Burst, 512 KB
• RAM: 2x 128MB SDRAM, low profile
• LAN: 1x Intel PRO 10/100 (onboard)
• PCI: 2 slots, for low profile cards
• Storage: CF-Card, IDE 40 pin
• Harddisk: Maxtor, 3.5", IDE, 40GB
• Onboard graphics: S3 Trio3D, 4MB
• Onboard sound: Crystal 4234, Sound Blaster 16/Pro compliant
• Frontpanel: audio output 3.5mm, audio output 3.5mm (Stereo)
• Backpanel: 2x USB ,2x Seriell, 1x Parallel, 1x RJ-45, VGA, 2x PS/2
• Fans: 1x 60mm x 60mm
• Power consumption: 10~30 Watt
• Software: GNU/Linux Debian "Edge" V4.0
• Status: running in production mode
• [ The Debian GNU/Linux project ]
• [ Netvista 2800: FAQ, Tips & Tricks etc. (german language) ]

Some informations about the project:

• Goal: no project goal for now - just playing around
• System: Sun Cobalt RaQ 2+
• Harddisk: Maxtor 40GB, IDE
• RAM: 48MB EDO 3.3V
• SCSI: external connector
• Software: Debian "Edge" (MIPS-Port)
• Status: running in test mode
• Thanks a lot Martin Michlmayr for the great work.
• [ How to install Debian on MIPS based Cobalt machines ]

Please use the following link to get informations about the project:

• [ The hyperCube² project ]